Amptek

In order to accommodate applications where the X-ray flux is too high for both the detector and the electronics that process the X-ray spectrum, we have developed a Collimator Kit to collimate the...

Tungsten (W) spacer/collimator for use with EXVC Collimator Kit where high energy X-rays above 150 keV are in use.  3.5mm thick tungsten with a 300µm hole

Long version of EXVC Collimator Kit which can accommodate up to 3 EXVC-W SPACERs (ordered separately)

CP75 vacuum feedthrough coupling for use with X123 and XR100 configured with either 5 inch or 9 inch extender

The CP100 is a vacuum feedthrough coupling on a 2.75 inch flange for use with the 50kV / 4W Mini-x2

The CP125 is a vacuum feedthrough coupling on a 2.75 inch flange for use with the 10W Mini-x2 (both 50kV and 70kV versions).

The DP5 is an enhanced Digital Pulse Processer and Multichannel analyzer on a stand alone board that can be used with Amptek's detectors.  The detector requires a separate Power Supply such as...

The PC5 is a power supply board that can be used with Amptek's detectors and the XR100 if you already have a DPP

The Amptek DP5G Kit is a state-of-the-art, high performance, low power digital pulse processor designed for use in scintillation spectroscopy systems. Connected to the anode of a PMT, it includes a...

Amptek’s MCA-8000D is a state-of-the-art, compact, high performance, digital MultiChannel Analyzer (MCA). It replaces the MCA-8000A, providing the same functionality with reduced dead time,...

The MCA8000D Option PA package has been developed to facilitate the use of the MCA-8000D for particle counting in airborne (Size Calibration) and liquid suspended1 (Number Calibration) particle...

XRS-FP2 is the next generation quantitative analysis software package for materials analysis using X-Ray Fluorescence (XRF). The single, integrated software package can be used in 3 different modes...