Amptek Collimator Kit for X123 and XR100

(No reviews yet) Write a Review


In order to accommodate applications where the X-ray flux is too high for both the detector and the electronics that process the X-ray spectrum, we have developed a Collimator Kit to collimate the primary X-ray beam. This system is comprised of the EXVC Collimator Housing which slides over the 1.5 inch extender of the X-123.

The EXVC Collimator Housing can accommodate up to two Tungsten (W) collimator disks that are placed inside a bayonet holder in front of the detector. By selecting the appropriate Tungsten collimator disks, the user can reduce the incoming X-ray flux and allow the detector and electronics to process the X-ray spectrum.

Seven different Tungsten collimator disks are provided with different size holes in order to allow for a wide range of applications:

  • 1 mm thick with 25 µm hole
  • 1 mm thick with 50 µm hole
  • 2 mm thick with 100 µm hole
  • 2 mm thick with 200 µm hole
  • 2 mm thick with 400 µm hole
  • 2 mm thick with 1000 µm hole
  • 2 mm thick with 2000 µm hole
View AllClose

0 Reviews

View AllClose